Customization: | Available |
---|---|
Color: | Transparent, All The Color |
Material: | Paper |
Still deciding? Get samples of US$ 0.1/Piece
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
|
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Description:
This product is a thermoplastic material, for a variety of materials can be applied to the hot melt adhesive, It can repeatedly heated plastic bonding. This kind of hot melt adhesive has good adhesion to textile, polyester, cotton, blended fabric, TPU, PVC, PC / ABS, and has good resilience, elasticity, heat resistance, cold resistance and water resistance .
Application
development direction and application is for clothing, shoes, textile accessories, handbags, luggage, ipad protective cover, mobile phone protective cover, sports equipment and other materials bonding.
Composition:
Polyurethane
Physical Characteristics:
Color |
transparent |
Release liner |
Glassine release paper |
Density |
1.18±0.02g/cm3 |
Thickness |
0.0125mm-1mm |
Opening Time |
10min |
Width |
5mm-1500mm |
Hardness |
82±2 Shore A |
Conventional thickness |
0.08mm,0.1mm,0.15mm |
Melt Flow Index |
5±1g/10min; Condition:ASTMD1238-04 |
Conventional Width |
1380mm |
Rheology Temperature |
112°C |
Length |
100 yards |
Operating temperature
|
130°C -160°C |
Finished products specification |
1380mm*100yards/roll |
Recommended Bonding Conditions:
Flat Press |
Second Flat Press |
Machine Setting: 120ºC-140ºC |
Machine Setting: 130ºC-160ºC |
Dwell Time: 5-15 seconds |
Dwell Time: 8-25seconds |
Pressure: 0.3-0.6mpa |
Pressure: 0.3-0.6mpa |
1,Bonding temperature and pressure as well as the time involved in the strength of the film to material. Bonding temperature must be close to the machine set the temperature, the pressure must be uniform, mold and pressure roller must be flat.
2,In different machinery and materials, the bonding conditions used will be different. The conditions marked here are only basic. The optimum bonding conditions should be made by creating suitable construction conditions for the particular applicationdamage, direct or consequential, arising out of the use, misuse or inability to use the product.
NOTICE: Seller hereby excludes any express warranties and the implied warranties of merchantability and fitness for a particular purpose. . Tunsing believes the information supplied are reliable, but does not guarantee that any results shown or claimed will be obtained. Before using the user shall determine the suitability and fitness of the product for its intended use. The user assumes all risks and liability whatever in connection with its own tests and use. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use the product.
Shirley | |||
Company name: | QINGDAO YULONG PACKAGING MACHINERY CO.,LTD | ||
Address: | YUJIACUN, TONGJI AVENUE, JIMO DISTRICT, QINGDAO, SHANDONG, CHINA |